Altima 2.5 L4-2.5L (QR25DE) (2002)
4.
Insert a foam insulator (P/N 80845-71L00) between the room lamp harness and the headliner (see figures 1 and 2).
NOTE:
The foam insulator has a covered self-adhesive side. It is not necessary to remove the adhesive cover. The headliner and the room lamp will hold the
foam insulator in place.
5.
Put the room lamp back on.
6.
Test-drive to make sure the rattle/vibration is fixed.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Operation (P0) line claim using the claims coding table shown.