Altima 2.5 L4-2.5L (QR25DE) (2002)
b.
Pull back and remove vinyl tube until you can see the wires fully exposed all the way back to the main Body harness (drivers side) or Body
harness # 2 (passenger side).
10.
Use essential Crimper Tool J-38751-2 to strip off 10-15 mm of insulation from each of the existing pre-tensioner branch wires.
CAUTION:
Use the correct size opening in the wire Crimper tool so you won't cut off any strands of wire. Less strands reduces the electrical load the wire
can handle.