Altima 2.5 L4-2.5L (QR25DE) (2002)
12.
Slide a solder connector over each pre-tensioner sub-harness wire (see Figure 9), then
^
Twist one end of the sub-harness wires onto one of the Body Harness wires (it doesn't matter which wire).
^
Twist the other sub-harness wire onto the other Body Harness wire.
NOTE:
Matching the wire colors between the sub-harness and Body Harness (polarity) is not critical.
^
Make sure the wires are securely twisted together (see Figure 10).