Altima 2.5 SL L4-2.5L (QR25DE) (2002)
/Page-2471005.png)
9.
Use the same method as Step 7 to disengage the rear sunshade guide clips.
10.
Remove the sunshade by sliding it forward.
11.
Inspect all four guide clips and remove only the sunshade guide clips that are keeping the sunshade from sliding smoothly in the guides.
The damaged guide clips may be:
^
Bent differently than a new clip
^
and/or out of the guide rails.
12.
Install new sunshade guide clips as required.
13.
Reinstall the sunshade into the sunroof rail.
NOTE:
Make sure the plastic ends of the guide clips are installed into the rail assembly.
14.
Reinstall the glass lid and sunroof guide trim plates.
15.
Confirm the sunshade opens and closes smoothly.
