Altima 2.5 SL L4-2.5L (QR25DE) (2002)
1. Remove torque member fixing bolts using power tool and brake hose connecting bolt.
2. Remove caliper and brake rotor.
INSTALLATION
CAUTION:
-
Refill with new brake fluid "DOT 3".
-
Never reuse drained brake fluid.
1. Install caliper assembly.
CAUTION:
-
Do not forget to install shims and washers.
2. Install brake hose to caliper securely.
CAUTION:
-
The copper washer of connecting bolt has to be replaced every time the fitting is disconnected.
3. Install all parts and tighten all bolts to specified torque. Refer to Brake Caliper; Diagrams; Exploded Views.
4. Bleed air. Refer to Brake Bleeding; Service and Repair.
5. Adjust the parking brake.