Altima 2.5 SL L4-2.5L (QR25DE) (2002)
Brake Pad: Service and Repair
Front
CL25VD (Front)
REMOVAL
-
If shims are rusted or show peeling of the rubber coat, replace them with new shims.
-
Whenever the brake pads are replaced, the inner shim, the outer shim and the shim cover have to be replaced as a set.
1. Remove master cylinder reservoir cap.
2. Remove pin bolt.
3. Suspend the cylinder body with wire. Then remove pads with retainers, inner and outer shims and pad return springs.