Altima 2.5 SL L4-2.5L (QR25DE) (2002)
^
Install so that identification mark can be correctly read when viewed from the exhaust side.
^
Install No. 1 camshaft bracket as follows.
-
Apply sealant to No.1 camshaft bracket as shown.
^
Use Genuine RTV Silicone Sealant, or equivalent.
CAUTION:
^
After installation, be sure to wipe off any excessive sealant leaking from part "A" (both on right and left sides).
^
Apply sealant to camshaft bracket contact surface on the front cover backside.
^
Apply sealant to the outside of bolt hole on front cover.
^
Position the No.1 camshaft bracket near the mounting position, and install it without disturbing the sealant applied to the surfaces.