Altima 2.5 SL L4-2.5L (QR25DE) (2002)
-
Check clearance all the way around the clutch disc.
Clutch disc-to-pulley : 0.3 - 0.6 mm (0.012 - 0.024 in) clearance
If the specified clearance is not obtained, replace adjusting spacer and readjust.
BREAK-IN OPERATION
When replacing compressor clutch assembly, always conduct the break-in operation. This is done by engaging and disengaging the clutch about 30
times. Break-in operation raises the level of transmitted torque.