Altima 2.5 SL L4-2.5L (QR25DE) (2002)
The voltage should be below 0.50 V at least once during this procedure.
6. If NG, replace heated oxygen sensor 2.
CAUTION:
-
Discard any heated oxygen sensor which has been dropped from a height of more than 0.5 m (19.7 in) onto a hard surface such as a concrete
floor; use a new one.
-
Before installing new oxygen sensor, clean exhaust system threads using Oxygen Sensor Thread Cleaner tool J-43897-18 or J-43897-12 and
approved anti-seize lubricant.