Altima 2.5 SL L4-2.5L (QR25DE) (2002)
/Page-1416027.png)
^
Remove the passenger-side front inner fender well in order to remove the alternator.
6.
Remove the top Plastic Engine Cover (as applicable).
7.
Remove all wire harness connections from the Alternator (see Figure E6).
8.
Remove the Alternator Belt (see Figure E6).
9.
Remove the Alternator Mounting Bolts (see Figure E6).
IMPORTANT:
Prevent the belt tensioner from loosing its tension by inserting a screwdriver (or other suitable device) through the tensioner mounting hole
(see Figure E7).
10.
Remove the Alternator from the vehicle.
Disconnect Oxygen Sensor Wire Harness:
