Altima 2.5 SL L4-2.5L (QR25DE) (2002)
2)
If time is OK, press [BACK] and go to step 5.
IMPORTANT NOTE:
^
If your ASIST PC is already being used to perform ECM Reprogramming, proceed to step 5 below.
^
If you are unsure whether your ASIST PC has already been set up for ECM Reprogramming, look in ASIST, under "CONSULT Utilities" -
"CONSULT-II Info" - "NISSAN" - "ECU Reprogramming". This will give you instructions for setting the Ethernet (IP) Address of the
ASIST PC and CONSULT-II. You will need to do this before performing ECM reprogramming.
DOWNLOAD (TRANSFER) DATA FROM ASIST INTO CONSULT-II
5.
From the ASIST PC main menu screen, select "CONSULT UTILITIES" (see Figure 3).