nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Recall - Driver Air Bag Connector Clip Installation|Page 12971 > < Recall - Driver Air Bag Connector Clip Installation|Page 12969
Page 3
background image

6.

Remove the two Air Bag Module Mounting Screws (see Figure 2).

NOTE:

Some vehicles have optional Security Screws (see example in Figure 2). You will have to use the special tool to remove these screws.

7.

Carefully move the Air Bag Module rearward enough to disconnect the Audio Controls Wire Harness Connector (if equipped). See Figure 3.

Install Connector Clips:

Recall - Driver Air Bag Connector Clip Installation|Page 12971 > < Recall - Driver Air Bag Connector Clip Installation|Page 12969