nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Clutch - Pedal Sticking/Hard Shifting|Page 11297 > < Wheel Speed Sensor|ABS|Page 11286
Page 1
background image

Clutch Switch: Customer Interest
Clutch - Pedal Sticking/Hard Shifting

Classification
MT01-001

Reference:
NTB02-025

Date:
March 1, 2002

2002 ALTIMA: CLUTCH ADJUSTMENT

APPLIED VEHICLE(S):
2002 Altima (L31) with Manual Transmission

Service Information

If any of the following apply to a 2002 Altima with manual transmission;

^

Clutch pedal does not fully return to the top of its travel,

^

Clutch pedal sticks down, near or at the floor,

^

Manual transmission is difficult to shift,

^

Recent clutch replacement.

Check the four following items:

^

ASCD switch may require adjustment.

^

Clutch pedal clevis pin may not be floating freely in the pedal clevis and clutch pedal bore.

^

Clutch pedal may not have free range of movement.

^

Clutch hydraulic system may contain air

Refer to the Service Procedure below to inspect and service these areas, if necessary.

Service Procedure

1.

Verify the incident as described in the Service Information section.

2.

Check the ASCD Switch clearance.

a.

Check to see if the clutch pedal clevis pin (see Figure 1) floats freely in the bore of the clutch pedal. It should not be bound by the clevis or
clutch pedal.

Clutch - Pedal Sticking/Hard Shifting|Page 11297 > < Wheel Speed Sensor|ABS|Page 11286