Altima 2.5 SL L4-2.5L (QR25DE) (2002)
/Page-2091005.png)
alignment eccentrics.
^
Make sure all fasteners are tightened to the correct torque specification.
^
CAUTION:
When tightening the rear suspension member mounting nuts, DO NOT EXCEED 100 N-m (10.3 Kg-m, 74 ft-lb).
Preliminary Service Step:
Before performing any procedures in this bulletin, apply Genuine Nissan Rust Penetrant P/N 999MP-A3020P (or equiv.) to all fasteners that will need to
be removed to perform the procedures in this bulletin. Refer to the illustration shown for the location of these fasteners.
