nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Technical Service Bulletins|Capacity Specifications|Page 12342 > < Technical Service Bulletins|Capacity Specifications|Page 12340
Page 1
background image

Fluid - M/T: Testing and Inspection

Checking 

OIL LEAKAGE AND OIL LEVEL
^

Check that oil is not leaking from transaxle.

^

Check oil level from filler plug mounting hole as shown in the figure. 

CAUTION:   Never start engine while checking oil level.

^

Set a new gasket on the filler plug and install it on the transaxle.
Filler plug: 30 - 39 Nm (3.1 - 4.0 kgf-cm, 23 - 28 ft. lbs.) 

CAUTION:   Do not reuse gasket.

Technical Service Bulletins|Capacity Specifications|Page 12342 > < Technical Service Bulletins|Capacity Specifications|Page 12340