Altima 2.5 SL L4-2.5L (QR25DE) (2002)
c. If calculated balance weight value exceeds 50 grams (1.76 ounces), install two balance weight sheets in line with each other as shown.
CAUTION: Do not install one balance weight sheet on top of another.
3. Start wheel balancer again.
4. Install drive-in balance weight on inner side of road wheel in the wheel balancer indication position (angle).
CAUTION: Do not install more than two balance weights.
5. Start wheel balancer. Make sure that inner and outer residual unbalance values are 10 grams (0.35 ounces) or below.
^
If either residual unbalance value exceeds 10 g (0.35 ounce), repeat installation procedures.
Wheel balance (Maximum allowable unbalance):
Rotation
^
Follow the maintenance schedule for tire rotation service intervals.
^
Do not include the T-type spare tire when rotating the tires.
CAUTION: When installing wheels, tighten them diagonally by dividing the work two to three times in order to prevent the wheels from
developing any distortion.
Tightening torque of wheel nut: 98 - 117 Nm (10 - 12 kg-m, 73 - 86 ft. lbs.)