Altima 2.5 SL L4-2.5L (QR25DE) (2002)
B.
Use a plastic pry tool to release the clips located at the rear sides of the console (see Figure 4a).
C.
Pull rearward on the console box assembly to release securing clips (see Figure 4b).
D.
Re-position the console box assembly, with the wire harnesses connected, to the passenger side of the center floor console (see Figure 4c).
5.
Remove 4 bolts that secure the All shift assembly to the vehicle (see Figure 4c).
6.
Disconnect the white wire harness connector from the front of the A/T shift assembly.
7.
Remove the A/T shift cable retaining clip (see Figure 5).
8.
Re-position the A/T selector guide as follows: