Altima GXE L4-2.4L (KA24DE) (1999)
-
Remove the three field coil fixing screws and remove the field coil.
INSTALLATION
-
Install the field coil.
-
Be sure to align the coil's pin with the hole in the compressor's front head.
-
Install the field coil harness clip using a screwdriver.
-
Install the pulley assembly using the installer and a hand press, and then install the snap ring using snap ring pliers.
-
Install the drive plate on the drive shaft, together with the original shim(s). Press the drive plate down by hand.