Altima GXE L4-2.4L (KA24DE) (1999)
Control Arm: Service and Repair
REMOVAL AND INSTALLATION
1. Remove stabilizer connecting rod from transverse link.
2. Remove cotter pin and lock nut securing lower ball joint to knuckle.
3. Strike knuckle with a hammer to separate lower ball joint from knuckle.
4. Remove bolts and nuts shown at left.
5. Remove transverse link and lower ball joint.
6. Install fixing bolts and nuts.
-
During installation, final tightening must be carried out at curb weight with tires on the ground.