Altima SE L4-2.4L (KA24DE) (1997)
Brake Pressure Chart
3. Check fluid pressure by depressing brake pedal.
CAUTION:
^
Depress pedal slowly when raising front brake pressure.
^
Check rear brake pressure 2 seconds after front brake pressure reaches specified value.
4. If output pressure is out of specifications, replace master cylinder See: Brake Master Cylinder/Service and Repair as an assembly.
NOTE:
^
Carefully monitor brake fluid level at master cylinder.
^
Use new "DOT 3" brake fluid.
^
Never reuse drained brake fluid.
5. Bleed air from the hydraulic system after disconnecting the brake fluid pressure gauge. See: Brake Bleeding/Service and Repair