Altima SE L4-2.4L (KA24DE) (1997)
Fusible Link: Diagnostic Aids
Fusible Link
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test
lamp.
CAUTION:
a. If fusible link should melt, it is possible that a critical circuit (power supply or large current carrying circuit) is shorted. In such a case,
carefully check these circuits and eliminate cause of problem.
b. Never wrap outside of fusible link with vinyl tape.
Important: Never let fusible link touch any other wiring harness, vinyl or rubber parts.