Altima XE L4-2.4L (KA24DE) (1999)
Altima (L30) Brake Judder Repair Flow Chart
Refer to the Repair Flow Chart shown to diagnose and repair the incident.
Rotor Indexing
When installing a new rotor, a rotor that has been surfaced off the car, or a rotor that has been removed for any reason, use the following indexing
procedure to ensure the minimum amount of rotor run-out.
1.
Remove the wheel assembly and ensure the rotor is fully contacting the hub. Clean the rotor to hub surface if it is rusty.
2.
Install the rotor and all lug nuts. Tighten the lug nuts to 40 ft-lbs.