Armada 2WD V8-5.6L (VK56) (2005)
9.
Cut the 2 Black with Silver Band wires 180 mm (7 inches) from the buckle sleeve, then discard the old harness.
IMPORTANT:
Make sure to measure correctly.
10.
Connect (solder) the buckle pre-tensioner wires you just cut to the new buckle pre-tensioner harness wires.
^
The New buckle pre-tensioner harnesses for the left and right side are different. Be sure to use the correct new buckle harness for the side
you're working on.