Nissan and Datsun Workshop Service and Repair Manuals

Brake Rotor/Disc: Specifications

Brake Rotor/Disc 

Front brake
CLZ31VC

Rotor outer diameter × thickness .............................................................................................................................  320 × 26 mm (12.60 × 1.02 inch)
Standard thickness (new) ...........................................................................................................................................................  26.0 mm (1.024 inch)
Repair limit thickness ................................................................................................................................................................  24.5 mm (0.965 inch)
Maximum uneven wear (measured at 8 positions) .................................................................................................................  0.015 mm (0.0006 inch)
Runout limit (with it attached to the vehicle) .............................................................................................................................  0.03 mm (0.001 inch)

Rear brake
AD14VE
Rotor outer diameter × thickness ...................................................................................................................................  320 × 14 mm (12.60 × 0.55 inch)

Standard thickness (new) ...........................................................................................................................................................  14.0 mm (0.551 inch)
Repair limit thickness ................................................................................................................................................................  12.0 mm (0.472 inch)
Maximum uneven wear (measured at 8 positions) .................................................................................................................  0.015 mm (0.0006 inch)
Runout limit (with it attached to the vehicle) .............................................................................................................................  0.05 mm (0.002 inch)