Armada 2WD V8-5.6L (VK56DE) (2006)
Figure E-5
5. Take the wire you removed from connector E120 and put it into the Maxi Fuse connector. Make sure to put it in the correct slot as shown in Figure
E-5.
6. Insert the wire from the Maxi Fuse into the slot of connector E120 (see Figure E-5).
NOTE:
-
The terminals will not snap in upside down.
-
If the terminal won't snap-in, you are trying to put it in upside down; turn it over.
7. Reconnect connector E120.
8. Connect the Maxi Fuse connector.