Armada 2WD V8-5.6L (VK56DE) (2006)
Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Arming and Disarming
-
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bags and seat belt pre-tensioners to deploy. Therefore, do
not work on any SRS connectors or wires until at least 3 minutes have passed.
-
After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to SRS-20, "SRS Operation Check". See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Diagnostic Procedures/Air Bag System/Diagnostic Test Procedures