Armada 2WD V8-5.6L (VK56DE) (2006)
^ Use the guide plate to center the tool over the relay.
9. Press down on top of Special Tool J-50389 while lifting the extraction side bars (see Figure 5).
IMPORTANT:
^ Make sure to use Special Tool J-50389 to extract the relay.
^ Using Special Tool J-50389 will ensure the relay is extracted straight up from the IPDM without causing damage to the IPDM female relay terminals.
10. Lift Special Tool J-50389 away from the IPDM (see Figure 6).
11. Make the old relay unusable by bending the connector prongs.