nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Transmission Temperature Sensor/Switch, A/T > < Transmission Pressure Test Port, A/T|Locations
Page 2
background image

^

When measuring the line pressure at the stall speed, refer to STALL TEST. See: Transmission Control Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Initial Inspection/Stall Test

6. After the measurements are complete, install the oil pressure detection plug and tighten to the regulation torque below.

Oil pressure detection plug: 7.3 Nm (0.74 kg-m, 65 inch lbs.)

CAUTION: Do not reuse the O-ring.

Line Pressure

Judgment of Line Pressure Test

Transmission Temperature Sensor/Switch, A/T > < Transmission Pressure Test Port, A/T|Locations