Nissan and Datsun Workshop Service and Repair Manuals

15. Remove O-ring from A/T assembly harness connector.

16. Disconnect TCM connectors.

CAUTION:
Do not damage connectors.

17. Remove A/T assembly harness connector from control valve with TCM using suitable tool.

18. Disconnect TCM connector and park/neutral position switch connector

CAUTION:
Do not damage connectors.

Installation

CAUTION:
After completing installation, check A/T fluid leakage and fluid level. Refer to See: Fluid - A/T/Service and Repair/Checking A/T Fluid.