Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Seat Back: Technical Service Bulletins
Interior - Seat Back Board Installation/Removal
Classification: BT08-023A
Reference: NTB08-062A
Date: July 21, 20009
SEAT BACK BOARD REMOVAL / INSTALLATION
This bulletin has been amended. Applied Vehicles has been updated. Discard all previous versions of this bulletin.
APPLIED VEHICLES:
2004 - 2009 Armada (TA60)
2004 - 2009 Frontier (D40)
2004 - 2009 Pathfinder (R51)
2004 - 2009 Titan (A60)
2004 - 2009 Xterra (N50)
SERVICE INFORMATION
This bulletin contains the Service Procedure for the removal and installation of the seat back board.
Refer to Module A for removal and installation of the soft seat back board.
Refer to Module B for the removal and installation of the hard seat back board.
PARTS INFORMATION
IMPORTANT:
The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing the repair.
SERVICE PROCEDURE
Module A (for soft seat backs)
1. Move / adjust the front passenger seat bottom and seat back to the full forward position.
2. Remove the right front soft seat back board as follows:
NOTE:
The seat back board is held on with:
^ 2 top tabs
^ 2 side tabs
^ 2 bottom clips (do not reuse, replace with new clips from the Parts Information table).