Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Brake Master Cylinder: Overhaul
BRAKE MASTER CYLINDER
Disassembly and Assembly
DISASSEMBLY
CAUTION:
-
Master cylinder assembly cannot be disassembled.
-
Do not drop parts. If a part is dropped, do not use it.
1. Pull the reservoir tank off the master cylinder assembly.
2. Remove the grommets from master cylinder assembly and discard the grommets.
CAUTION:
Discard the grommets, do not reuse.
3. Remove the fluid level sensor from the reservoir tank.
4. Remove the front and rear pressure sensors and discard.
CAUTION:
Discard the front and rear pressure sensors, do not reuse.
ASSEMBLY
CAUTION:
-
Never use mineral oil such as kerosene, gasoline during the cleaning and assembly process.
-
Do not drop parts. If a part is dropped, do not use it.
1. Apply brake fluid or rubber grease to the new grommets, then insert the new grommets into the master cylinder assembly.