nissan Workshop Repair Guides

Nissan and Datsun Armada 4WD V8-56L Flex Fuel Workshop Manuals

Initial Inspection and Diagnostic Overview|Page 6125 > < Initial Inspection and Diagnostic Overview|Page 6123
Page 2
background image

Is the inspection result normal?
YES - GO TO 4
NO - Repair harness or connector.
4.CHECK SEAT BELT BUCKLE SWITCH UNIT
Perform a unit inspection for the seat belt buckle switch. Refer to See: Component Tests and General Diagnostics/Seat Belt Buckle Switch Signal
Circuit/Component Inspection.
Is the inspection result normal?
YES - Replace the combination meter. Refer to See: Instrument Cluster / Carrier/Service and Repair.
NO - Replace the seat belt buckle pre-tensioner assembly LH (seat belt buckle switch).

The Key Warning Does Not Sound

THE KEY WARNING DOES NOT SOUND

Description

Key warning does not sound even though key is in ignition and front door LH is opened.

THE KEY WARNING DOES NOT SOUND

Diagnosis Procedure

1.CHECK WARNING CHIME OPERATION
With key removed from the ignition and the front door LH open, turn the lighting switch to 1st or 2nd position.
Does warning chime sound?
YES - GO TO 2
NO - Replace combination meter. Refer to See: Instrument Cluster / Carrier/Service and Repair.
2.CHECK KEY SWITCH CIRCUIT
Perform inspection of the key switch circuit. Refer to See: Component Tests and General Diagnostics/Key Switch Signal Circuit (With Intelligent
Key)/Diagnosis Procedure (with Intelligent Key) or See: Component Tests and General Diagnostics/Key Switch Signal Circuit (Without Intelligent
Key)/Diagnosis Procedure (without Intelligent Key).
Is the inspection result normal?
YES - GO TO 3
NO - Repair harness or connector.
3.CHECK KEY SWITCH
Perform a unit inspection for the key switch. Refer to See: Component Tests and General Diagnostics/Key Switch Signal Circuit (With Intelligent
Key)/Component Inspection (with Intelligent Key) or See: Component Tests and General Diagnostics/Key Switch Signal Circuit (Without Intelligent
Key)/Component Inspection (without Intelligent Key).
Is the inspection result normal?
YES - Replace the BCM. Refer to See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair.
NO - Replace the key switch and ignition knob switch (with Intelligent Key) or key switch and key lock solenoid (without Intelligent Key).

Initial Inspection and Diagnostic Overview|Page 6125 > < Initial Inspection and Diagnostic Overview|Page 6123