Recall R1010: Fuel Level Sending Unit Replacement for Armada 4WD (2009) - TSB 10-037A
_flex_fuel/Page-1618005.png)
c. Remove the Fuel Temperature Sensor from the Plastic Retaining Clip.
d. Remove the wires from the Securing Tab.
e. Unplug the White Wire Connector at the top of the fuel pump.
^
DO NOT disturb the Black Wire Connector located next to the white Wire connector.
f. Carefully cut the tie-wrap securing the harnesses to the corrugated tubing.
CAUTION:
DO NOT damage the wires or the wire insulation when cutting the Tie-Wrap.