Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Suspension Control Module: Removal and Replacement
CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the rear LH interior trim panel. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair .
2. Disconnect the battery negative terminal.
3. Disconnect the suspension control unit electrical connector.
4. Remove the two bolts and remove the suspension control unit.
INSTALLATION
Installation is in the reverse order of removal.
Suspension control unit bolts : 6 N.m (0.6 kg-m, 53 in-lb)