nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Engine Controls - DTC P0451 Stored In The ECM|Page 361 > < Engine Controls - MIL ON/DTC P1421 Stored|Page 356
Page 1
background image

Engine Control Module: Customer Interest
Engine Controls - DTC P0451 Stored In The ECM

Classification: EC09-027

Reference: NTB09-121

Date: November 3, 2009

2009 TITAN AND ARMADA; DTC P0451 STORED

APPLIED VEHICLES:
2009 Titan (A60)
2009 Armada (TA60)

IF YOU CONFIRM

DTC P0451 (EVAP Control System Pressure Sensor Performance) is stored,

ACTIONS

1. Confirm this bulletin applies.

a. Check and compare your current ECM Part Number to Table A or B shown in this bulletin.

b. If that part number does not match one in Table A, this bulletin does not apply. Go back to ASIST for further diagnostic and repair information.

2. If this bulletin applies, reprogram the ECM.

CLAIMS INFORMATION

IMPORTANT:

The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.

SERVICE PROCEDURE

1. Connect C-III to the vehicle to begin the reprogramming procedure.

Engine Controls - DTC P0451 Stored In The ECM|Page 361 > < Engine Controls - MIL ON/DTC P1421 Stored|Page 356