Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Suspension Control Module: Procedures
CONTROL UNIT
Initialization Procedure
1. If control unit has been replaced, proceed to step 2. If control unit has not been replaced, use CONSULT-III "CLEAR HEIGHT INI" work support
function to clear initialization flag and value. The CK SUSP warning lamp should illuminate. Using CONSULT-III "EXHAUST SOLENOID"
active test, release the air pressure from the rear load leveling air suspension system.
2. Roll vehicle forward and backward.
3. Use CONSULT-III "ADJUST HEIGHT INI" work support function to set initialization condition.
4. Confirm that CK SUSP warning lamp is OFF.