Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
-
Do not reuse oil seal.
-
Apply petroleum jelly to oil seal.
2. Apply petroleum jelly to the circumference of the new dust cover.
Position the new dust cover as shown.
CAUTION:
-
Do not reuse dust cover.
-
Position the projection in the position shown.
-
1: Rear oil seal
-
2: Rear case assembly
-
A: Protrusions
3. Install the new dust cover to the rear case using Tool.
Tool number : KV40105310 ( - )
CAUTION:
-
Do not reuse dust cover.
-
Apply petroleum jelly to dust cover.
4. Install the rear propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft 2S1410.
5. Refill the transfer with fluid and check for fluid leakage and fluid level. Refer to See: Fluid - Transfer Case/Service and
Repair/Procedures/Replacement.