Axxess 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)
FIGURE 5
3.
Add a thin washer shim (1.6 mm thickness) to the dovetail (Figure 5) and adjust as described above. Check for rattle. If rattle is still present,
continue.
4.
Add a second thin washer shim (1.6 mm thickness) to the dovetail and check for a rattle. If the rattle can still be heard, continue to Step 3.
Step 3 - Creaking Noise
FIGURE 6
1.
Remove the B-pillar garnish molding and gently pull back the headliner as shown below (Figure 6).
FIGURE 7
2.
Spray a thin layer of Heavy Duty Rust Preventative (999MP-A6000) into the roof panel area at the slider door guide rail attaching
screws (Figure 7). Direct the spray toward the front of the vehicle and use precaution to avoid overspray.
NOTE:
The seat belt motor should be removed or covered with a cloth until the rust preventative dries to prevent it from getting
into the motor.