nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Electrical Specifications|Page 2477 > < Electrical Specifications|Page 2475
Page 1
background image

EGR Temperature Sensor: Mechanical Specifications

Crank Angle Sensor

Torque value ................................................................................................................................................  10 - 13 N-m (1.0 - 1.3 kg/m, 7 - 9 ft.lbs.) [1]

EGR Temperature Sensor

Torque value ................................................................................................................................................... 15 - 25 N-m (1.5 - 2.5 kg/m, 11 - 18 ft.lbs.)

Engine Temperature Sensor

Torque value ..................................................................................................................................................  20 - 29 N-m (2.0 - 2.9 kg/m, 14 - 22 ft.lbs.)

Fuel Injector Rail

Torque value ............................................................................................................................................  16 - 21 N-m (1.6 - 2.1 kg/m, 12 - 15 ft.lbs.) [1]

O2 Sensor

Torque value ..................................................................................................................................................  40 - 50 N-m (4.1 - 5.1 kg/m, 30 - 37 ft.lbs.)

Air Fuel Mixture

CO content ...............................................................................................................................................................................................  less than 5 % [2]

Idle Speed

USA MODELS

M/T or A/T ...........................................................................................................................................................................................  700 ± 50 rpm [3]

CANADA MODELS

M/T or A/T ...........................................................................................................................................................................................  750 ± 50 rpm [3]

Idle Switch

Closes .......................................................................................................................................................................................  1000 ± 150 rpm in neutral

Ignition Timing

At 750 rpm ................................................................................................................................................................................................  10° ± 2° BTDC

[1] Fasteners
[2] At idle with 2.5k ohm resistor in place of engine temperature

sensor and with AIV and O2 sensor disconnected.

[3] At operating temperature and transmission in neutral.

Electrical Specifications|Page 2477 > < Electrical Specifications|Page 2475