Cube L4-1.8L (MR18DE) (2010)
Antenna: Service and Repair
Removal And Installation
Audio System
ANTENNA BASE
Removal and Installation
REMOVAL
1. Remove luggage side upper finisher. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Luggage Floor Trim/Exploded View.
2. Remove assist grip and headlining clips. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Exploded View.
3. Pull headlining (rear). Obtain a service area.
4. Remove antenna base mounting nut.
5. Remove antenna base.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may be deformed, when antenna
base mounting nut tightening torque is loose.
Display Audio System
ANTENNA BASE
Removal and Installation
REMOVAL
1. Remove luggage side upper finisher. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Luggage Floor Trim/Exploded View.
2. Remove assist grip and headlining clips. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Exploded View.
3. Pull headlining (rear). Obtain a service area.
4. Remove antenna base mounting nut.
5. Remove antenna base.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may be deformed, when antenna
base mounting nut tightening torque is loose.