Cube L4-1.8L (MR18DE) (2010)
-
Check the clearance when installing the front bumper fascia.
Removal And Installation Of The Energy Absorber, Etc.
FRONT BUMPER
Removal and Installation of the Energy Absorber, etc.
REMOVAL
1. Remove air guide seals (A) and (B).
2. Remove the energy absorber.
3. Remove bolts to remove the horn assembly.
[Krom]
4. Remove nuts to remove the extension horn bracket.
5. Remove the rivet to remove the air guide assembly (FR).
INSTALLATION
Install in the reverse order of removal.
1. Fix the air guide assembly (FR) with rivets.
2. Install the extension horn bracket and the horn assembly.
3. Install the energy absorber.
4. Remove release paper from the bonding surface of air guide seals to affix them (A and B) as shown in the figure.