Cube L4-1.8L (MR18DE) (2010)
CAUTION:
-
The EPT seal cannot be reused. Replace it with new EPT seal.
-
Remove the oil and grease from the attachment surface and clean it.
1. Fit the front bumper fascia (LOW) (LH, RH) in the bottom part of the front bumper fascia without creating clearance and fix with rivets.
2. Fit the front bumper side cover (LH, RH) in both sides of the front bumper fascia without creating clearance and fix with rivets.
3. Fit the front bumper fascia (UPR) (LH, RH) in the top of the front bumper fascia without creating clearance and fix with a rivet.
4. Place air guide seals and EPT seal on the back of the front bumper fascia.
[Krom]