Cube L4-1.8L (MR18DE) (2010)
Removal And Installation
REAR BUMPER
Removal and Installation
REMOVAL
CAUTION:
Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with oil.
1. Fully open back door.
2. Remove rear bumper cover.
3. Remove back door finisher and rear combination lamp (LH/RH). See: Lighting and Horns/Parking Lamp/Service and Repair/Removal And
Installation.
4. Remove rear fender cover.
5. Disconnect harness connector (A).
6. Remove bumper fascia upper mounting bolts (LH/RH).
7. Remove bumper fascia lower fixing clips.
8. Remove bumper fascia both ends fixing screws.
9. Disengage bumper fascia and rear panel lower connecting portion (A).