Cube L4-1.8L (MR18DE) (2010)
Fuel Door: Service and Repair
Removal And Installation
With Intelligent Key System
FUEL FILLER LID OPENER
Removal and Installation
REMOVAL
FUEL FILLER LID
1. Fully open fuel filler lid.
2. Remove mounting screws, and then remove fuel filler lid.
FUEL FILLER LID OPENER CABLE
1. Fully open fuel filler lid.
2. Remove dash side finisher (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
3. Remove front kicking plate inner (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
4. Remove center pillar lower garnish (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
5. Remove rear kicking plate inner (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
6. Remove luggage side finisher (LH) (upper/lower). See: Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Luggage Floor
Trim/Removal And Installation.
7. Remove center seat belt retractor. See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Rear Seat Belt/Removal And
Installation.
8. Remove mounting bolts, and then remove fuel filler lid opener handle.
9. Remove fuel filler lid opener cable from fuel filler lid opener handle.
10. Push fuel filler lid lock assembly front the vehicle, while pushing the pawls.
11. Remove fuel filler lid opener cable from fuel filler lid lock assembly.
12. Pull up floor trim. See: Interior Moulding / Trim/Carpet/Service and Repair/Removal And Installation.
13. Remove fuel filler lid opener cable mounting clips.
14. Remove fuel filler lid opener cable.
INSTALLATION
Install in the reverse order of removal.
Without Intelligent Key System
FUEL FILLER LID OPENER
Removal and Installation
REMOVAL
FUEL FILLER LID
1. Fully open fuel filler lid.
2. Remove mounting screws, and then remove fuel filler lid.
FUEL FILLER LID OPENER CABLE
1. Fully open fuel filler lid.
2. Remove dash side finisher (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
3. Remove front kicking plate inner (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
4. Remove center pillar lower garnish (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
5. Remove rear kicking plate inner (LH). See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removal And Installation.
6. Remove luggage side finisher (LH) (upper/lower). See: Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Luggage Floor
Trim/Removal And Installation.
7. Remove center seat belt retractor. See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Rear Seat Belt/Removal And
Installation.
8. Remove mounting bolts, and then remove fuel filler lid opener handle.
9. Remove fuel filler lid opener cable from fuel filler lid opener handle.
10. Push fuel filler lid lock assembly front the vehicle, while pushing the pawls.
11. Remove fuel filler lid opener cable from fuel filler lid lock assembly.
12. Pull up floor trim. See: Interior Moulding / Trim/Carpet/Service and Repair/Removal And Installation.
13. Remove fuel filler lid opener cable mounting clips.