Cube L4-1.8L (MR18DE) (2010)
Is the inspection result normal?
YES - GO TO 6.
NO - Replace BCM. See: Body Control Systems/Body Control Module/Service and Repair/With Intelligent Key System/Removal And Installation.
4.CHECK DOOR LOCK AND UNLOCK SWITCH GROUND
Check continuity between power window main switch harness connector and ground.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace harness.
5.CHECK DOOR LOCK AND UNLOCK SWITCH
See: Component Tests and General Diagnostics/Door Lock And Unlock Switch/Driver Side/Component Inspection/Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 6.
NO - Replace power window main switch. See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and
Repair/Removal And Installation.
6.CHECK INTERMITTENT INCIDENT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Service Information For Electrical Incident/Intermittent Incident.
- INSPECTION END
With Intelligent Key System
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE : Component Inspection
1.CHECK DOOR LOCK AND UNLOCK SWITCH
1. Turn ignition switch OFF.
2. Disconnect power window main switch (door lock and unlock switch) connector.
3. Check continuity between power window main switch (door lock and unlock switch) terminals.
Is the inspection result normal?
YES - INSPECTION END
NO - Replace power window main switch. See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and
Repair/Removal And Installation.
Without Intelligent Key System
DOOR LOCK AND UNLOCK SWITCH