Cube L4-1.8L (MR18DE) (2010)
identification colors (A) and (B).
-
Install camshafts so that camshaft dowel pins (A) on the front side are positioned as shown in the figure.
NOTE:
Though camshaft does not stop at the positions as shown in the figure, for the placement of cam nose, it is generally accepted camshaft is placed for
the same direction of the figure.
3. Install camshaft bracket with the following procedure:
a. Remove foreign material completely from camshaft bracket backside and from cylinder head installation face.
b. Apply liquid gasket (A) to camshaft bracket as shown in the figure.
Use Genuine Liquid Gasket or equivalent.
c. Tighten mounting bolts of camshaft brackets in the following steps, in numerical order as shown in the figure.