nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Tune-up and Engine Performance Checks > < Timing Chain Tensioner|Specifications

Cube L4-1.8L (MR18DE) (2010)

Page 1
background image

Timing Cover: Specifications

Timing Cover

M6 .............................................................................................................................................................................  6.6 N.m (0.67 kg-m, 58 in-lb) (Bolt 1)

M8 .................................................................................................................................................................  25.5 N.m (2.6 kg-m, 19 ft-lb) (All other bolts)

M10 ..................................................................................................................................................  55 N.m (5.6 kg-m, 41 ft-lb) (Bolts 6, 7, 10, 11 and 14)

M12 .........................................................................................................................................................  75 N.m (7.7 kg-m, 55 ft-lb) (Bolts 2, 4, 8, and 12)

Install front cover, and tighten mounting bolts in numerical order as shown in the figure.

-

Refer to the following for the installation position of bolts.

CAUTION: Attaching should be done within 5 minutes after liquid gasket application.

After all bolts are tightened, retighten them to specified torque in numerical order as shown in the figure.

Tune-up and Engine Performance Checks > < Timing Chain Tensioner|Specifications