Cube L4-1.8L (MR18DE) (2010)
-
BCM detects the combination switch status signal "5AD" when the signals of OUTPUT 1 and OUTPUT 4 are input to INPUT 5.
-
BCM judges that the TURN RH switch and TAIL LAMP switch are ON when the signal "5AD" is detected.
WIPER INTERMITTENT DIAL POSITION
BCM judges the wiper intermittent dial 1 - 7 by the status of INT VOLUME 1, 2 and 3 switches.
NOTE: For details of wiper intermittent dial position, See: Wiper and Washer Systems/Description and Operation/Front Wiper And Washer
System/System Diagram