Cube L4-1.8L (MR18DE) (2010)
Turn Signal Bulb: Service and Repair
Front Combination Lamp
FRONT COMBINATION LAMP
Replacement
CAUTION:
-
Disconnect the battery negative terminal or the fuse.
-
After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
-
Never touch bulb by hand while it is lit or right after being turned off.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.
HEADLAMP BULB
1. Disconnect the headlamp bulb connector.
2. Remove the back cover.
3. Remove the retaining spring lock. And remove the bulb from the headlamp housing assembly.
PARKING(FRONT SIDE MARKER) LAMP BULB
1. Remove the fender protector. See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Exploded View. Keep a service
area.
2. Rotate the bulb socket counterclockwise and unlock it.
3. Remove the bulb from the bulb socket.
FRONT TURN SIGNAL LAMP BULB
1. Rotate the bulb socket counterclockwise and unlock it.
2. Remove the bulb from the bulb socket.