Cube L4-1.8L (MR18DE) (2010)
Tire Pressure Monitor Receiver / Transponder: Testing and Inspection
Component Function Check
TIRE PRESSURE RECEIVER
Component Function Check
1.TIRE PRESSURE MONITORING SYSTEM OPERATION
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. On "DATA MONITOR", select "AIR PRESS FL", "AIR PRESS FR", "AIR PRESS RR" and "AIR PRESS RL", and check that the tire pressures
match the standard value.
CAUTION:
Stop the vehicle and within 5 minutes, use CONSULT-III "DATA MONITOR" to display the tire pressure for all wheels.
Is the inspection result normal?
YES - INSPECTION END
NO - Perform trouble diagnosis. See: Diagnosis Procedure.